Did I Say Engineering?

IMG_0218 IMG_0219 IMG_0238 IMG_0239 IMG_0240 IMG_0241 IMG_0242 IMG_0243 IMG_0248 IMG_0249 IMG_0250

Wow! That is what I have to say about the last two weeks events. First the front battery box was too short by 1/4″. Here is the lesson. Never go by the specs. Always measure. I even added 1/4″ for play when I designed the box. each battery was between 1/32″ and 1/16″ off so that by the time I added 11 batteries I was 1/2 inch off in my calculation. Since I designed it to be 1/4″ longer I was only off by 1/4″. The box is being made as I write this and should be done this next week. In the meantime I have done the following. Secured and anchored the mid eng battery boxes, connected the driveline, connected the shift linkage (final) connected the cooling system to the chill plate and bolted the controller and chill plate assembly onto the motor bracket, procured and bolted on the rear deck lid latch, bolted on the engine cover, and funnel downspouts for drainage. On Friday Solar City installed my 4.5KW solar system.  I am just about to the the point where I am only hooking up wires and testing. This is the point where one gets anxious to finish and the possibility of short cuts starts to take place. From my experience with EV1E I have decided to NOT let that happen. This car needs to be done right all the way through. This car is going to be a representation of what one can do in their own garage with just a few tools and a passion for making the world better. It must be right for people to embrace the idea.So here are a few pics, enjoy

Mark

Keep On Pluggin

The Walk Around Movie

I decided to do a promotional video for Keep On Pluggin and the walk around for the Porsche. I didn’t want it to be your average guy walking around a car and expaining what he was doing on the car. This is the first of a series of films (videos) I will be undertaking to show the progress of this build. I do hope you enjoy it… If you do please leave a comment thank you

The Walk Around Movie

Keep On Pluggin